Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier
Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier

Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier

Marka : Marantz
Fiyat : €4.000,00(KDV Dahil)
TL Fiyat : ₺40.363,60(KDV Dahil)
₺13.454,53 'den başlayan taksitlerle

Marantz MODEL 30 Siyah Stereo 200W Integrated Amplifier

Marantz MODEL 30 Stereo 200W Integrated Amplifier
 
Enjoy enhanced audio quality with your favorite stereo pair of speakers and the black Marantz MODEL 30 Stereo 200W Integrated Amplifier. It outputs up to 100W per channel at 8 ohms and features a dedicated phono input among its seven total stereo RCA inputs. The phono input features a switchable impedance to accommodate turntables with either MM or MC phono cartridges. The aluminum and steel chassis design helps the amplifier resist external interference.
 
Sound Master Tuning
This tuning technique helps ensure enhanced detail and musicality.
 
Discrete and Accurate Detailing
HDAM-SA3 technology incorporates dozens of independent parts, each selected for their unique sound signature. By curating individual parts rather than adopting an off-the-shelf solution, the HDAM of the MODEL 30 can outperform other integrated circuits to provide enhanced musicality.
 
Augmented Sensitivity
The MODEL 30 is engineered to replicate the sensitivity and feel of a vintage analog amplifier, even when simply adjusting the volume.
 
Musical Premium Phono EQ
The MODEL 30 is designed to deliver optimal sound quality by simplifying the signal path in the Phono EQ stage, allowing it to be used with both moving magnet and moving coil cartridges, thanks also to a built-in MC head amplifier. This design helps lower distortion, which is why the phono stage uses two-stage amplification, combining Marantz HDAMs with JFETs in the input stage for high input impedance. This allows the non-negative-feedback design to be further simplified by the deletion of coupling capacitors, further reducing distortion and enhancing signal quality.
 
MC/MM Phono Input Impedance Selector
To help optimize sound performance when using a turntable, and to accommodate as many configurations as possible, the MODEL 30 is equipped with a phono input impedance selector. Input impedances can be adjusted to MC LOW (33 ohms), MC MID (100 ohms), and MC HIGH (390 ohms).
 
Designed to Last
The solid chassis is constructed from non-magnetic aluminum panels and a rigid steel top cover to help mitigate external interference. Brass-machined independent input terminals for CD and Phono, plus nickel-plated speaker terminals help ensure the best signal possible.
 
Marantz Model 30 Specs
Amplifier
Number of Channels
2
Rated Output Power
100 W per Channel @ 8 Ohms
200 W per Channel @ 4 Ohms
Frequency Response
5 Hz to 50 kHz
Signal to Noise Ratio
Phono (MM): 88 dB
Phono (MC): 75 dB
CD: 107 dB
Total Harmonic Distortion (THD)
0.005% (1 kHz, 8 Ohms)
Damping Factor
500
Circuit
Amplifier: Switching Amp (Hypex NC500/SMPS600 by Single)
Speaker Impedance
4 to 16 Ohms
Connectors
Input
1 x Stereo RCA (Phono with Ground Screw)
1 x Stereo RCA (CD)
1 x Stereo RCA (Tuner)
1 x Stereo RCA (Line 1)
1 x Stereo RCA (Line 2)
1 x Stereo RCA (Recorder)
1 x Stereo RCA (Power Amp)
Output
1 x Stereo RCA (Recorder)
1 x Stereo RCA (Pre-Out)
1 x 1/4" / 6.35 mm Headphone (Front)
Speaker Connectors
2 x Binding Post Pairs (SPKT-100+)
Other Connectors
1 x RCA Remote In
1 x RCA Remote Out
Input Sensitivity and Impedance
Phono (MC Low): 250 μV / 33 Ohms
Phono (MC Mid): 250 μV / 100 Ohms
Phono (MC High): 250 μV / 390 Ohms
Phono (MM): 2.3 mV / 39 Kilohms
CD/Tuner/Line/Recorder: 220 mV / 18 Kilohms
Power Amp: 1.0 V / 18 Kilohms
Physical Specifications
Construction Material
Front Center Panel, Side Cover, Volume Knob, Input Selector, Power Button: Aluminum
Top Cover: Steel
Chassis: SECC
Power Requirements
120 VAC, 60 Hz
Power Consumption
Operational: 130 W
Standby: 0.2 W
Dimensions (W x H x D)
17.4 x 5.1 x 17" / 443 x 130 x 432 mm
Weight
32.2 lb / 14.3 kg
Benzer Ürünler